| | | 6000/7000 Series High-Flow Hydrogen Purifier Systems |
The 6000- and 7000-Series hydrogen purifiers are designed for use as new or replacement cells for use in your existing hydrogen purification and hydrogen production equipment. Hydrogen purity levels of 99.9999999% are achievable with continuous operation.
These purifiers are available in a number of different models in order to accommodate your hydrogen gas output flow and spacing requirements. The flow rates across the 6000/7000 series range from 60 to 400 standard liters per minute (SLPM). Please note that the physical dimensions vary, depending on output.
|
|
| Length
(Inches) |
Height
(Inches) | | Model 6060 | 60 | 15.6 | 13.7 | | Model 6080 | 80 | 20.4 | 13.7 | | Model 6100 | 100 | 20.4 | 13.7 | | Model 6130 | 130 | 25.2 | 13.7 | | Model 6160 | 160 | 30.0 | 13.7 | | Model 7080 | 80 | 9.7 | 14.8 | | Model 7145 | 145 | 14.6 | 14.8 | | Model 7160 | 160 | 14.6 | 14.8 | | Model 7180 | 180 | 19.5 | 14.8 | | Model 7195 | 195 | 19.5 | 14.8 | | Model 7210 | 210 | 19.5 | 14.8 | | Model 7220 | 220 | 19.5 | 14.8 | | Model 7245 | 245 | 19.5 | 14.8 | | Model 7260 | 260 | 24.4 | 14.8 | | Model 7280 | 280 | 24.4 | 14.8 | | Model 7290 | 290 | 24.4 | 14.8 | | Model 7310 | 310 | 24.4 | 14.8 | | Model 7325 | 325 | 24.4 | 14.8 | | Model 7340 | 340 | 29.3 | 14.8 | | Model 7360 | 360 | 29.3. | 14.8 | | Model 7375 | 375 | 29.3 | 14.8 | | Model 7390 | 390 | 29.3 | 14.8 | | Model 7405 | 400 | 29.3 | 14.8 |
Product Highlights:
• Highly reliable P+E inside-feed palladium cell design
• Compact design for large UPH flows
• Proportional, differential, integrating temperature controller
• Accelerated Life Testing ensures reliability
• One-year warranty
Mechanical Specifications:
• Tubing/Cell Material: 316L stainless steel
• Helium Leak Test: 1E-9 cc/sec
• Back Panel Tubing Connections: 1/4" face seal fittings
• Membranes Tested to 400 PSIG
• Finish on all UPH tubing electro-polished
• Finish on all UPH cell surfaces micro-polished
Process Specifications:
• Ultra-Pure Hydrogen Purity: 99.9999999%
(at UPH flow > 20% of max flow or > 15 SLPM, whichever is less)
• Ultra-Pure Hydrogen Flow Rate: 60-400 SLPM (model dependent)
• Hydrogen Gas Feed Inlet Pressure: 36 - 200 PSIG (model dependent)
• Feed Hydrogen Gas Purity: ~99.95%
• Hydrogen Bleed Outlet: typically 1 to 4% of feed hydrogen
• Typical Average Power Consumption: <700 watts
| |
