|
9000MZ Series High-Flow Micro-Channel Hydrogen Purifier
|
Power+Energy’s 9000MZ Series Micro-Channel Hydrogen Purifier provides a cost-effective and convenient solution for obtaining ultra-pure hydrogen. The 9000MZ Series is designed to produce a continuous supply of low-cost, ultra-pure hydrogen from commercial cylinders or an in-house source of hydrogen. This Micro-Channel purifier provides hydrogen purification levels of nine-nines (no more than 1 part per billion total impurities), with continuous operation at flow rates ranging from to 30 to 700 standard liters per minute (SLPM).
The 9000MZ Series offers many unique features, such as easy-to-use one-button operation, compact design for large UPH flows, complete system control and monitoring with the integrated PLC Controller, immunity to power failure, and automatic leak check on shutdown. Temperatures, rate of rise, and a variety of other data are monitored to insure that your 9000MZ Series Micro-Channel Hydrogen Purifier operates safely and within precise guidelines.
Power+Energy’s Micro-Channel Hydrogen Purifier is ideal for use with MOCVD reactors, as well as in laboratories, universities, and any other environment where ultra-pure hydrogen is required.
Design Features:
• High Efficiency Micro-Channel Membrane technology
• PLC Controller for reliable operation
• Simple, automated startup and shutdown
• Front-panel emergency-off (EMO) switch
• Can use hydrogen or nitrogen purge during standby
• Automatic recovery from short duration power outages
• Software and connections for helium leak testing (hot or cold)
• Interface via LAN and dry contacts for relay interface
Process Specifications:
•
Ultra-pure hydrogen flow rate:
Models from 30–5600 SLPM
(2–230 m³/hr)
•
Hydrogen gas feed inlet pressure: 200 PSIG
•
Ultra pure hydrogen outlet: > 0 PSIG
•
Hydrogen gas feed purity: ~99.95%
•
Ultra pure hydrogen purity: 99.9999999%
•
Hydrogen bleed outlet: 2% for 99.95% hydrogen
•
Operation: Automatic
Mechanical Specifications:
• Top panel tubing connections: 1/4" face seal fittings
•
Maximum pressure feed hydrogen: 250 PSIG
•
Nitrogen Purge Gas feed: <
70% of H2 pressure
• Helium leak test: < 1E-9 scc/sec
•
Tubing / cell material: 316L stainless steel
•
Finish on all UPH tubing: Electro-polished
•
Finish on all UPH cell surfaces: Micro-polished
•
Dimensions: 80 "H × 28 "W × 23"D
(2032 MM H x 711 mm W × 584 mm D)
•
Weight: Approximately 550 lbs (250 kg)
|
