|
Using Micro-Channel Technology, P+E Manufactures Optimum Solutions For Your
|
Hydrogen Purification And Separation Requirements |
| |
Power+Energy uses its wide array of hydrogen technologies to extract hydrogen from a mixed gas stream, typically provided by a fuel reformer. These systems are optimized for hydrogen efficiency, using advanced Micro-Channel Separation Membranes to remove hydrogen in the presence of high concentrations of other gases — P+E’s s technology delivers ultra-pure hydrogen at high separation efficiencies in a compact and rugged package.
|
|
|
Power+Energy
Fully Automated High-Flow
Micro-Channel Hydrogen Purification Systems
|
|
Power+Energy features a full line of Micro-Channel Hydrogen Purifiers to support any high purity requirement from bench-top to fab-wide
Standard Features of all P+E Hydrogen Purifiers:
- Advanced Micro-Channel Membrance Technology
- Deliver 99.9999999% Pure Hydrogen from any hydrogen source
- Support the most demanding purity requirements
- Ideally suited for compound semiconductor and other advance processed including LED, SiC GaN and Photovoltaic Fuel Cells and related H2 needs
|
|
| |
PE9000MZ Series |
PE9000S Series |
PE2100P Series |
|
Fab Wide Capacity |
Tool or Lab Wide |
Bench-Top Supply |
|
|
|
|
-
Compact Cabinet
-
Fully Automated
-
Centralized or Point of Use
|
|
|
|
| |
|
|
|
|
Standard on the PE9000MZ Series Hydrogen Purifiers |
| |
PE9000MZ Series: Fab Wide Capacity
Designed to NFPA 496 Standards for purged and pressurized enclosures for electrical equipment.
Benefits:
- Lower Hydrogen Supply Chain Cost
- Lower Cost of Ownership
- vs. Catalytic + Getter
- vs. Cryogenic Purifier
- vs. Other Palladium Purifiers
- No Regeneration or Consumables
- High Flow Capacities
Design Features:
- The electrical cabinet in the PE9000MZ has Type Z pressurizing.
- Rugged High Reliability Design
- Compact Cabinet Design
- N2 Purged Control Cabinet with UPS for Power Failure Protection
- Separate vented process cabinet
- Continuous monitoring for H2 and ventilation flow
- Remote Monitoring and Control
Options:
- Stack or Cabinet mounted Polytron 2XP hydrogen detector
- Mass Flow Meter
- Light Tower Indicator
|
Advantages:
- Ultra-Pure Hydrogen from any hydrogen source
- Absolute Purity > 99.9999999%
- PPT levels of O2 + H2O for LED's
- PPT levels of N2 for PV and Sic
- Protects from variation in supply purity
|
|
|
|
|
PE9000S Series: Tool or Lab Wide
P+E's PE9000S Series high-flow stand-alone system is designed for customers requiring UPH gas flows from 30 to 1400 standard liters per minute. The advanced P130 controller is integrated into the chassis. LAN-based remote access and integrated helium-leak test ports and software are also included. The PE9000S series represent the industry's most powerful UPH production option available today.
Design Features:
- GE Industrial Controller for reliability and global parts access
- Color touch-screen LCD for monitoring and control
- P130 controller uses flash memory for data log and software pressurizing.
- Display with 3 lines of status information and scrollable menus
- Simple, automated startup and shutdown
- Front-panel emergency-off (EMO) switch
- Can use hydrogen or nitrogen purge during standby
- Automatic recovery from short duration power outages
- Software and connections for helium leak testing (hot or cold)
- Compact, cabinet designed for table, rack or wall mounting
- Interface via LAN and dry contacts for relay interface
|
Tool or Lab Wide
|
|
Power+Energy
Low-Flow
Micro-Channel Hydrogen Purification Systems |
| |
|
PE2100P Series: Bench-Top Supply
This system is the ideal solution for an "on-demand" output flow. Power+Energy provides three different models, with output capacities of 6, 14, or 30 standard liters per minute. The PE2100P series is designed to be safely turned on and off whenever ultra-pure hydrogen gas is required.
Design Features:
- Produces nine-nines ultra-pure hydrogen
- Proportional, differential, integrated temperature controller
- Reliable P+E inside-feed palladium cell design
- Lightweight, compact chassis
- Easy to operate
- Accelerated Life Testing and helium-leak testing ensure reliability
- Immune to power failure
|
Bench-Top Supply:
|
|
|
|
|
|
|
Power+Energy Micro-Channel Palladium-Alloy
Hydrogen Separators and Membrane Reactors |
|
P+E offers Micro-Channel Palladium-alloy Membrane assemblies for use as hydrogen separators for reformate streams or as membrane reactors. Based on next-generation membrane technology, these assemblies are designed to provide extremely high hydrogen recovery rates while delivering ultra-pure hydrogen for fuel cells and related applications.
|
|
Power+Energy
Micro-Channel Hydrogen Purifier Cells |
6000/7000 Series:
The 6000/7000 Series Micro-Channel Purifiers are P+E's second high-flow option. Matching the high-capacity output of the 9000 series, these cells are designed for use as new or replacement cells in your existing equipment.
|
 |
|
|
|
|
|
In order to meet our customers' exact requirements, Power+Energy's state-of the-art Micro-Channel Hydrogen Purification units are available in both low-flow and high-flow separation systems. A low-flow system is a small, compact Micro-Channel Hydrogen Purifier designed for customers requiring 6 to 30 standard liters of ultra-pure hydrogen per minute. The Micro-Channel Separation Systems are designed for an "on-demand" usage pattern in which ultra-pure hydrogen gas is not in constant use. High-flowMicro-Channel Purifiers are an "always-on" solution. These high-output machines provide a continuous stream of up to 650 standard liters per minute.
If you have any questions about which P+E system would best fit your hydrogen purification needs, or if you would like to discuss the option of a custom-built Micro-Channel Hydrogen Purifier, please
contact us.
|
| |
|
|
|
Copyright © 2002-2010 Power & Energy,
Inc. |
|
|
|
| | | |
